|
DESCRIPTION: BOYSEN® Wallguard™ Dirt Resisting Latex is a new breed of latex paint that has a very high resistance to dirt, dust, smog, and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants. It is suitable to be used in industrial areas and along highways. It is specially fit for repainting medium and high-rise buildings where the need to preserve a freshly painted look with less maintenance is of utmost importance.
PRINCIPAL USES: It is ideal as an exterior finish for newly constructed buildings as well as for repainting old structures.
FEATURES:
BOYSEN® Wallguard™ Dirt Resisting Latex is 100% acrylic. It is highly resistant to alkali, mildew, airborne pollutants and dust. It has good exterior durability and it resists fading, cracking, and peeling. It also has outstanding gloss retention due to its superior block and scrub resistance.
FINISH: Semi-Gloss
DRY TIME:
Touch: 1 hour
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq. m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are not recommended for Wallguard™.
THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
CLEAN-UP SOLVENT: Water
PACKAGING: 4-Liters and 16-Liters
APPLICATION: By brush, roller, or airless spray
AVAILABLE COLORS: *Use only BOYSEN® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory-mixed colors. Do not use B-1466 Hansa Yellow and B-1407 Toluidine Red for exterior applications.
|
|
DESCRIPTION: BOYSEN® Wallguard™ Dirt Resisting Latex is a new breed of latex paint that has a very high resistance to dirt, dust, smog, and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants. It is suitable to be used in industrial areas and along highways. It is specially fit for repainting medium and high-rise buildings where the need to preserve a freshly painted look with less maintenance is of utmost importance.
PRINCIPAL USES: It is ideal as an exterior finish for newly constructed buildings as well as for repainting old structures.
FEATURES:
BOYSEN® Wallguard™ Dirt Resisting Latex is 100% acrylic. It is highly resistant to alkali, mildew, airborne pollutants and dust. It has good exterior durability and it resists fading, cracking, and peeling. It also has outstanding gloss retention due to its superior block and scrub resistance.
FINISH: Semi-Gloss
DRY TIME:
Touch: 1 hour
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq. m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are not recommended for Wallguard™.
THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
CLEAN-UP SOLVENT: Water
PACKAGING: 4-Liters and 16-Liters
APPLICATION: By brush, roller, or airless spray
AVAILABLE COLORS: *Use only BOYSEN® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory-mixed colors. Do not use B-1466 Hansa Yellow and B-1407 Toluidine Red for exterior applications.
|
|
SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
Repainting
Scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting.
For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
PAINTING SCHEDULE:
New Concrete
Primer: BOYSEN® Acrytex™ Primer B-1705
Putty: BOYSEN® Acrytex™ Cast B-1711
Topcoat: BOYSEN® Wallguard™ B-5715 (2 coats)
Repainting
Topcoat: Apply two coats of BOYSEN® Wallguard™ B-5715 on properly prepared surface
|
