Pacific Paint (Boysen) Philippines, Inc., - Two-component Epoxy Based Coatings

BOYSEN^® Acqua Epoxy™

BOYSEN^® Acqua Epoxy™

DESCRIPTION: BOYSEN^® Acqua Epoxy™ is a two-component water-based acrylic epoxy paint that has superior solvent, chemical, and stain resistance. It is ideal for concrete floors and properly primed metal surfaces. It has the advantages of easier application and better weather resistance properties.

B-2910 serves as a Curing Agent designed to be compounded with Acqua Epoxy™.

PRINCIPAL USES: It is ideal for interior and exterior floorings, walls, metal substrates, and other well-primed surfaces.

FEATURES:

Better Exterior Durability

The acrylic nature of BOYSEN^® Acqua Epoxy™ gives it better gloss retention and resistance to ultraviolet rays.

Outstanding Abrasion Resistance

It can withstand foot and light vehicular traffic.

Longer Pot Life

Pot life extends beyond 8 hours that can simplify contractor schedules and provide cost savings from wasted, unusable catalyzed paint.

Chemical Resistant

It resists stains, solvents, and low concentrations of acid and alkali.

Excellent Brushability &
Easy Water Clean-up

It does not require thinners and solvent reducers. It is easier to apply than conventional solvent- based finishes.

Low-odor

Ideal for painting in enclosed areas without the need to relocate personnel. Being water-based, it is also non-flammable.

FINISH: Semi-Gloss

DRY TIME:
Touch: 30 minutes
Recoat: 4 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity

TINTING: All colors should be factory-mixed

THINNING SOLVENT: Use as supplied

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters (B-2910 Curing Agent is available in 1-Liter cans)

APPLICATION: By brush, roller or airless spray

AVAILABLE COLORS:
B-2900 White
B-2930 Gray
B-2940 Handicap Blue
B-2950 Chrome Green
B-2965 TrafficYellow
B-2970 Safety Orange
B-2976 Ceramic Red
B-2990 Black
*Available colors listed comes with B-2910 Curing Agent for Acqua Epoxy™.

B-2910 serves as a Curing Agent designed to be compounded with Acqua Epoxy™.

PRINCIPAL USES: It is ideal for interior and exterior floorings, walls, metal substrates, and other well-primed surfaces.

FEATURES:

Better Exterior Durability

The acrylic nature of BOYSEN^® Acqua Epoxy™ gives it better gloss retention and resistance to ultraviolet rays.

Outstanding Abrasion Resistance

It can withstand foot and light vehicular traffic.

Longer Pot Life

Pot life extends beyond 8 hours that can simplify contractor schedules and provide cost savings from wasted, unusable catalyzed paint.

Chemical Resistant

It resists stains, solvents, and low concentrations of acid and alkali.

Excellent Brushability &
Easy Water Clean-up

It does not require thinners and solvent reducers. It is easier to apply than conventional solvent- based finishes.

Low-odor

Ideal for painting in enclosed areas without the need to relocate personnel. Being water-based, it is also non-flammable.

FINISH: Semi-Gloss

DRY TIME:
Touch: 30 minutes
Recoat: 4 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity

TINTING: All colors should be factory-mixed

THINNING SOLVENT: Use as supplied

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters (B-2910 Curing Agent is available in 1-Liter cans)

SURFACE PREPARATION:
Concrete Flooring
Remove oil and grease by using detergents or degreasers. Painting over a roughened concrete floor is recommended to improve adhesion of succeeding coats.

Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN^® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

Treat rusted steel by sanding and wire brushing. Use BOYSEN^® Metal Etching Solution B-71 on remaining rust. Let it stay for 10 - 15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

PAINTING SCHEDULE:
Concrete Flooring
Mix 3 parts of BOYSEN^® Epoxy Primer White B-2200 to 1 part of its catalyst. (Pot life: 5 hours) Allow 20 minutes induction time then thin the prepared mixture with BOYSEN^® Epoxy Reducer B-55 in a 1:1 ratio. Apply as primer coating on bare concrete. Let dry overnight.

Mix 4 parts BOYSEN^® Acqua Epoxy™ and 1 part of its catalyst. Allow 20 minutes induction time. Mixture may gel if not used within 24 hours. Apply 2 - 3 coats as topcoat, allowing for at least 4 hours between coats. For best results, recoating should be done overnight.

Metal Surfaces
Prime bare metal using BOYSEN^® Epoxy Primer Red Oxide B-2277. Let dry for 8 hours before recoating. Finish with 2 - 3 coats of BOYSEN^® Acqua Epoxy™. Let dry for 4 hours before recoating.

Note: Foot traffic abrasion resistance fully develops after 3 days of curing. For heavy-duty application, allow 7 days of drying.

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.